Home insulation in Manhattan, KS - a house that's sealed first, then insulated

Drafty rooms, a hot upstairs or a high power bill? We find the gaps, fix what's underneath, then insulate in the right order.

Spray foam coats the high ceiling of a commercial building above metal framing and large silver air ducts.

What does a home insulation upgrade involve?One plan for your Manhattan house

Gray spray foam covers the sloped metal roof of a large warehouse with exposed steel trusses and lights.
Attic roof framing with pale insulation fitted between the wooden trusses.

Most calls about home insulation in Manhattan, KS start with a drafty room, a hot upstairs or a power bill that keeps climbing. The cause is usually air slipping through gaps in the attic, walls and crawl space, and we seal those first, since new insulation laid over open gaps just fights a draft.

I look at the attic, the walls and whatever is underneath, then give you one plan in order that you can do all at once or a piece at a time. Foam costs more and seals as it insulates, but sealing the gaps and topping up loose fill usually wins unless your ductwork runs through the attic.

The price moves with how much of the house we're covering, how many inches are already up there, how tight the attic is and whether soaked or dirty old material needs insulation removal first. The schedule turns on access, repairs and any permit. At the estimate I walk you through what I see and the order I'd do it in.

You'll hear what I found and why each step comes when it does, so call (785) 236-2032 when you're ready.

What home insulation covers in your house

Every house mixes spaces, so we match the material to each one, loose fill where finished surfaces should stay put and foam where moisture or ductwork changes the job.

  • Attic sealing and top-up

    We close the gaps around can lights, pipes and the attic hatch, then blow loose fill in through a hose so it settles around joists without moving anything.

  • Walls and garage ceilings

    Finished walls can usually be filled through small openings with the drywall left in place, and we seal and insulate the floor over a garage so that room holds heat.

  • Crawl spaces and basements

    Cold floors usually come from below, so we seal the rim joist where framing meets the foundation and do crawl space insulation, often in closed-cell foam that blocks moisture.

Crawl space floor covered with a white vapor barrier beneath exposed wooden joists, silver ducts, and utility lines.

Why Manhattan homeowners call Sterlingbefore the attic gets another layer

I learned this work on a municipal crew, where every job got checked before sign-off, and I run our jobs the same way, one careful step at a time.

  • I come out to every job myself

    I look over your attic, walls and what's underneath in person, and I stay on site with our own installers while they work.

  • We look under the old insulation

    If what's up there got soaked or filled with droppings, new material on top just buries the problem, so we check first and deal with it.

  • Full depth out to the attic edges

    Coverage often ends up deep in the middle and thin at the edges, so we carry it out to the corners and keep the eave vents clear for airflow.

  • Licensed and insured

    We're licensed and insured, and I'm happy to show you both at the estimate before anyone climbs into your attic.

  • Working in Manhattan since 2023

    I started this business here in 2023 to bring the careful, checked work of public buildings into people's homes.

Get a whole-house insulation planfor your Manhattan home

Tell us about your attic access, your house's age, any gas or oil appliances and any vermiculite you've seen. We reply within one business day to set up a free estimate at your home, with no pressure to book.

From first call to walkthroughone step at a time

I keep it simple by showing you what I find and the order I'd do things in, so you know what each step is for before we start.

  1. You call or send a message

    Call (785) 236-2032 or use the form, and we'll get back to you to set up a time for me to come take a look.

  2. I look the house over

    I come out myself, check the attic, walls, crawl space or basement, and give you one plan with the steps in the order I'd do them.

  3. Permits and prep

    Once you're ready, we sort out any permit with the right office and take care of whatever has to come first, like wet or dirty old insulation.

  4. We seal, then insulate

    Our installers and I close the gaps first, then add insulation to the depth the plan calls for, with the attic edges as full as the middle.

  5. We walk through it together

    When we're done, I walk through the finished job with you, show you what went where and point out anything worth keeping an eye on.

Questions about home insulation

How much does home insulation cost in Manhattan, KS?

Across the US, installed blown-in attic insulation usually costs about $4 to $7.50 per square foot. That's a national range for attic work, not our price, and your own figure turns on the area, what's already up there and how easy the attic is to reach, which I go over at the estimate.

Should air leaks be sealed before insulating?

Yes, seal first, because insulation money can go to waste when the gaps in ceilings, walls and the foundation stay open. If a gas or oil appliance vents on its own, tighter sealing can pull its exhaust back indoors, and national guidance suggests having it tested before and after the work.

How long does attic insulation take?

In an attic that's easy to get into and move around in, sealing and adding insulation can usually be done in a day or two, according to national guidance. A tight attic, repairs that have to come first or a whole-house plan can stretch that, and I'll tell you what yours involves when I come out.

What attic problems need fixing before adding insulation?

Wet insulation from a roof leak, moldy or rotted framing, vents that blow moist air into the attic and little or no attic ventilation should be fixed first, and national guidance says to have a professional handle them. We put those at the front of the plan, since insulation over a wet attic keeps the problem going.

What should I do if I find vermiculite or old wiring in my attic?

Leave vermiculite, the flaky gray mineral fill, alone until an approved lab tests it, because it may contain asbestos. Knob and tube wiring from before 1930 can be a fire hazard where it touches insulation, so tell us about either one before we plan anything.

How do I check an insulation contractor's license in Manhattan, KS?

Use the city's licensed contractor lookup, or call the Risk Reduction office at 785-587-4506 with license questions. We're glad to have you look us up before we start.

Home insulation around Manhattan

Manhattan's Risk Reduction office issues building permits and doesn't list insulation as permit-free, so we check with them before we start. From Manhattan we work the cities around it, so pick yours below or call.

Plan your home insulation in Manhattanstarting with what's already up there

Call (785) 236-2032 or use the form, and if you can, peek through the attic hatch and note how many inches are up there, since that tells me a lot about your home insulation plan before I arrive.